Flashjacks firmware updated to Ver 1.4

Flashjacks cartridge by MRC user Aquijacks received a massive updating since its release as reflected below:

Ver 1.4

• 1 SLOT expander. With the possibility of canceling or activating its four subslots for the internal insertion of any device synthesized and shown in this manual. Any device can use any subslot that we say.
• 4 FlashROM units with 15 load mappers and several synthesized models of EPROMS that are self-selected by load predictive model (AMD, ATMEL, MICROCHIP, etc). The mappers have a predictive system that mixes the heuristics with a database. Each FlashROM unit has a loading capacity of up to 4 Megabytes each. All units have the possibility to use erasing and writing codes, etc, allowing you to read and record infinitely many times until it is turned off. It does not deteriorate due to the number of recordings. Access speed lower than 40nS and even 2nS peaks.
• 4 MAPPER RAM units compatible even with the MSX1. Configurable from native 64kB (for some primitive MSX) up to 4 Megabytes each. Access speeds lower than 40nS and even 2nS peaks. Cartridge autorefresh without using the MSX itself.
• 4 units MEGARAM compatible. Configurable up to 2 Megabytes each. Access speeds lower than 40nS and even 2nS peaks. Cartridge autorefresh without using the MSX itself.
• 1 compatible SINFOX unit up to Ver 4.04 with access to SDCARD. Access to its EPROM of origin with its mapper and with the possibility of writing both in card and EPROM.
• 1 SUNRISE compatible IDE unit. Autoconversion and on-the-fly operations to SDCARD card. The data is transformed IDE <-> SD transparently to the user. Compatible with NEXTOR SUNRISE IDE drivers Ver 2.1 Alpha2. Only compatible in LBA mode. Not compatible in CHS or other mode. Full read and write compatibility and SD switch against accidental writing. SDCARD access compatible to SDSC and SDHC up to 4GB which is what the NEXTOR driver allows. Future possibility of increasing capacities with modification of the drivers. Hot swap compatible extraction and insertion of SD card. All of them managed with a driver adapted for the Flashjacks.
• 2 selectables PSG stereo sound units. Sampling rate 48khz 16bits per channel. No slots are lost.
• 2 selectables SCC stereo sound units. Sampling rate 48khz 16bits per channel. The slot or occupied sublot are selectable. This device allows double slot occupation.
• 1 selectable stereo FM sound unit. Sampling rate 48khz 16bits per channel. No slots are lost for audio capturing. In addition, you can add an FM-PAC unit with full synthesis where the internal soft is included with its original mapper and even an 8kbyte SRAM with predictive autosave.
• 1 selectable OPL3 stereo sound unit. Sampling rate 48khz 16bits per channel. It can be transmuted into MUSIC MODULE FM, MOONSOUND FM or OPL3 as configured. With the ROM of FRS1.3 the capacities are increased and the FM can even be derived to the OPL3.
• 1 selectable SAMPLER PCM 8bits sound unit. Compatible with the COVOX system or with the PCM of the MSX turbo R.
• 1 selectable stereo compatible sound unit SN76489. Sampling rate 48khz 16bits per channel.

Relevant link: Flashjacks in action - video 1
Relevant link: Flashjacks in action - video 2